Acrobat Tips: Graphics in PDFs
Editor's Note: The following article was written with Acrobat 5 in mind and does not specifically discuss the recently released Acrobat 6, although it has been reviewed for accuracy and relevance to the new software.
Any discussion of graphics in PDFs is inherently closely related to the specific content, intended uses of the PDF file, and the function of the graphics within the file. Factors such as graphic format, image resolution, and color depth all depend on the specific use of the PDF. And because of the many issues involved, there are invariably trade-offs and compromises to be made.
The manner in which graphics are displayed in a PDF depends on a number of factors, including the source graphics, its graphic format (vector/bitmap), the bitmap resolution as indicated in the authoring application, the distilling job options, and the viewing preferences.
Graphics are stored as a computer file in two distinct ways: bitmap and vector.
Bitmap graphics are a collection of dots called pixels (picture elements), arranged in a matrix, each pixel with a different color value. Bitmaps are the native format of photographs, scanned images, and screen captures. The number of pixels in a given area is known as resolution, commonly expressed as dpi (dots per inch) or ppi (pixels per inch).
Bitmaps are resolution-dependent, which means that for optimal display in Acrobat, there must be a match between the pixel matrix stored in the graphics and the display pixel matrix. When a given bitmap is displayed using a different number of pixels, let's say a 100-by-100-pixel bitmap is displayed in an area of 160 by 160 pixels, or in an area of 90 by 90 pixels, some pixels are added or eliminated. This process is known as resampling, and results in degradation of image quality. Rotating bitmaps using angles other than 90 degrees also causes images to be distorted.
Common bitmap formats include BMP, GIF, TIFF, JPEG, and PNG.
Vector graphics are a list of drawing objects (such as lines, arcs, curves, circles, and rectangles), encoded as textual or binary instructions.
Vector graphics work best when real-life photographs are not necessary. In fact, they can often be clearer in detail than a photograph, enabling you to emphasize the important details and eliminate or minimize details that cause visual noise. However, when vector graphics try to imitate a photograph, the look can be synthetic or technical.
Vector graphics can also pose some difficulties when displayed in Acrobat:
- Thin lines may be displayed with inconsistent line thickness.
- Complex multi-component drawings may challenge Acrobat's drawing functions, resulting in a painfully slow painting process that involves many thousands of segments. As the rendering result is not cached by Acrobat, the slower display is experienced every time you zoom in/out or go the next page and back.
- When you have layers or gradations implemented as multiple objects, Acrobat's display process shows different objects temporarily displayed and then covered partially -- which may sidetrack the reader's attention.
As a vector graphic is independent of display/output resolution, it can be scaled or rotated flexibly. It will always display/print at the highest resolution of the output device used. Because of this, a PDF with vector graphics can be viewed at various magnifications (effectively different resolutions) with no degradation or loss of quality.
Common formats for vector graphics include WMF, SVG, and CGM. Authoring tools, such as Microsoft Word or Adobe FrameMaker, include their own vector graphics tools, which are directly carried to the PDF during distilling.
Some vector formats (WMF, for example) support bitmaps as a component. EPS can contain both vector graphics and bitmap graphics.
Following are general recommendations and guidelines to improve the handling of graphics in your PDFs.
Make sure that your original graphic has the level of detail or color depth needed.
Graphics quality can only deteriorate during conversion to PDF, or when the PDF is displayed. If the original graphic is not of sufficient quality, nothing will help. Be aware also that saving original graphics in some graphics formats will either reduce the number of colors (e.g. GIF) or cause an irreversible loss of image data (JPEG). The Compress Text and Line Art setting in the Distiller Job Options affects only vector graphics. This setting should always be selected, as the compression of text and vector graphics is lossless.
As to bitmap compression/resampling, you must make a choice based on the current state of the graphics and the intended uses of the PDF. As a minimum, lossless compression should be used (Zip, 8-bit). But as lossless compression is often not good enough in terms of compression ratio, lossy JPEG compression may be used, depending on the image properties and after carefully inspecting the impact of the different quality settings on various images used. Resampling may be effective if your graphic has a resolution that is much higher than needed, such as 600 dpi (alternatively, you can resample specific images in a graphics program).
Close familiarity with the type of graphic information and the context of uses is essential. For example, JPEG compression, even of the highest quality, will damage delicate medical images to be analyzed by experts; on the other hand, its effect on general-purpose background images may not be noticeable, even when medium/low quality compression is used.
As a general recommendation, the Color Management Policies (Distiller Settings> Job Options> Color tab) should be set to Leave Color Unchanged. In some screen captures, downsampling may cause text to be unreadable when displayed or printed. In other instances, lossy compression results in blotchy areas and unreadable text.
Rewrite the PDF
Make sure to rewrite the PDF (Save As, overwriting the same file), as this operation may improve the internal storage of graphics significantly. For example, identical graphics included on every page will be stored only once and reused as necessary.
Although you can provide the PDF user with guidelines for setting local preferences for optimal viewing quality, it is likely that most Acrobat Reader users do not change the default display preferences (these are local to the specific computer, and cannot be controlled from a PDF file). It is best, therefore, if you plan the graphics so that they will be displayed reasonably with the default settings.
Smoothing Preferences. Smoothing, also known as anti-aliasing, softens the edges of graphics shapes and text in order to minimize the contrast between the background and the text or graphics.
Smoothing often improves on-screen display, but some people find smoothed graphics or text appear out of focus and prefer to turn the specific option off.
Smooth Text. Default: on. It applies to all text items, which may be present in vector graphics, or to text items serving as graphics (symbols or icons).
Smooth Line Art (Acrobat 5). Default: off. This preference improves the display of most vector graphics, but it may cause some thin lines to become gray. It also slows down the display, to some extent.
Smooth Images. Default: on. The image-smoothing option improves the display of some bitmaps (depending on the original image resolution and the current magnification).
Download this PDF file [44KB] to experiment with the impact of smoothing on different graphic types (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
Accessibility Preferences (Acrobat 5). Some users may change the default color schemes to improve readability, and select their own colors for text and for page background. Black or "almost" black text will be displayed in the color specified for text; text in other colors will be left as is. When the page background color is specified to be non-white, the solid white fill of vector objects or white backgrounds of bitmap images (such as a bitmap displaying a triangle button) becomes noticeable and may be visually disturbing.
With vector graphics, you can use transparent or "no fill" settings to prevent the opaque white presence. This applies to graphic objects as well as to frames used to hold text or graphics in your authoring application.
It is widely accepted that well-designed graphics can improve communications, especially when dealing with technical subjects. This is even more applicable to on-screen documents than to paper-based documents, because of different reader expectations and reading patterns (readers tend to scan screens even more than pages, and have a shorter attention span for long paragraphs).
Which graphic format is better for PDFs: bitmap or vector? There are several considerations when deciding which format to use, first and foremost depending on the function of the graphics. The use of these main function categories in PDFs will be discussed in turn:
- Photographs (such as a product or person)
- Screen captures
- Illustrations (such as diagrams, flow charts, graphs)
- Interface graphics (such as buttons, icons and navigation maps)
- Company logos
The display quality of photographs depends on the quality of the original photograph (resolution, color depth) and on the display zoom.
Acrobat's display resolution at 100% zoom is 72 dpi. When you view an image present on a PDF page at a 100% zoom, the higher resolution an image may have will not be of value. As the display resolution cannot be changed, hardware downsampling effectively takes place -- where different pixels are omitted.
However, the higher resolution will cause a slower display and a larger file size. Higher resolution images will be beneficial when you print the page or when you zoom in -- a 400% zoom will mean an effective resolution of 288 dpi, for example.
Bitmaps in a PDF file are displayed with optimal quality only at a specific effective resolution. Changing the magnification (the same document may open with different magnifications in different computers based on view settings and preferences) will have an immediate effect on bitmaps. (This differs from display of bitmaps in HTML pages in Web browsers, where the same 100% magnification is used at all times, so that image distortion is not possible.) Depending on the page size and text layout, it may be better to display optimized graphics in a separate window. To do this, store the graphics in a separate, dedicated PDF with a default 100% zoom, and link references from the textual PDF to the graphics. This way, the zoom level of the text document can be specified differently from the graphics.
Reference to graphics can be linked to figures placed in a multi-page PDF. Alternatively, if each figure is displayed in a separate PDF, it can have a unique title (displayed in the title bar).
The target PDF can be displayed in a new window (overriding preferences). When this PDF is closed, the text document is displayed in its previous location.
Meaningful Resolution. When you integrate images in your authoring application, make sure to use a resolution that will match your PDF needs. If the PDF is primarily designed for on-screen display, use resolutions that will make the image display well in 100-200% zoom. If print is intended as well, higher resolutions will be needed. (In addition to actual printing, you can also have an idea as to how an image may print by inspecting the PDF at 300% zoom.)
Need both display and print? You may have a compromise approach where the resolution is a bit higher than needed for display purposes, and not too low for printing purposes (e.g. 150 dpi). Alternatively, in PDFs with lots of images, you may have two different PDFs: one optimized for print, and the other optimized for screen. (The same source file may be distilled with different downsampling job options to achieve the appropriate image resolutions in the PDF.)
Dynamic Image Interpolation for Photographic Images. Dynamic Image Interpolation improves the visual result and is recommended for photographic images, especially when these will be used at higher magnifications. When the resolution of an image is significantly lower than the effective display resolution, image interpolation attempts to produce a smooth transition between adjacent pixels, reducing jaggy or blocky visual artifacts.
Dynamic image interpolation can be turned on for a specific bitmap through the EPS export in Photoshop, or globally -- for all bitmaps in the PDF being distilled -- through a special command in Acrobat Distiller's prologue.ps file. This setting is best applied individually, providing you with a higher level of control. For example, you can have all background graphics or photographs created with interpolation turned on, and screen captures without image interpolation. Note that the dynamic image interpolation somewhat slows the display. Image interpolation may cause text to appear "foggy" when the PDF is displayed at standard magnifications. Download an example here [364KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
Callouts. If your photograph includes callouts, consider implementing these through text in your authoring program, rather than as part of the bitmap image, for these reasons:
- Bitmap text is adversely affected by downsampling and display distortions, and is often rendered unintelligible.
- Bitmap text cannot be searched with Acrobat's Find or Search functions.
- If you have lines pointing to specific items in a bitmap, consider adding a white border for lines crossing dark areas (where the line merges with the background).
- Avoid diagonal lines/oblique angles as much as possible, because of the staircase effect. Alternatively, use diagonals with 45 degrees (or 30 or 60 degrees as a second choice).
Although screen captures are a kind of photograph, they are used -- and misused -- so often that they warrant discussion as a separate category.
Screen captures are so common in technical documentation that we tend to overlook the fact that they are not always necessary. Your first consideration should be whether the screen capture is necessary at all, and if so, whether a schematic drawing can do a better job.
When you do decide to use screen captures, follow these guidelines:
Capturing the screen. Turn off text anti-aliasing smoothing in your operating system (or the ClearType rendering option in Windows XP) before taking the screen capture, so that the captured image is as clear as possible.
Color schemes. Consider using a different set of colors in screen captures to identify these as static.
Cropping. If not necessary, don't use the entire screen. Unless the entire screen is necessary, consider showing only a cut-out of the relevant section. This helps to focus the user and to remove excess noise.
Resolution. For a screen capture to look best at a zoom level of 100%, it has to be incorporated into the page (at the authoring stage) with a resolution of 72 dpi.
The screen capture will then be displayed as intended at a zoom of 100%, and with the least distortion at zoom multiples of 50%.
When screen captures are viewed at arbitrary magnifications, the display results can vary significantly, and this is particularly evident in the text. This is the case when the zoom level is set to Fit Page, or Fit Width. If you wish to display the screen captures optimally, you may want, at least initially, to set the default zoom of the PDF to 100% (or any other specific value matching the resolution of your images).
Example: Using a picture viewer to display optimal screen captures. When displayed in Acrobat/Reader (not through a Web browser), screen captures are displayed in a separate window (overriding the Open Cross-Document Links in Same Window local preference). Download the text example here [56KB] and download the graphics example here [48KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
In any case, it is important to inspect the text quality at various magnifications, as well as in print (if print is intended).
Dynamic Image Interpolation. Acrobat's Dynamic Image interpolation is not recommended for screen captures or other bitmaps that include text. When used with common zoom levels, interpolation makes the text fuzzy or greyish -- when displayed and possibly also when printed.
For the most part, illustrations are displayed better as vector graphics than as bitmaps.
However, as much as possible, try to refrain from using diagonal lines/oblique angles, because of the staircase effect (Smooth Line Art will minimize this effect). Shapes made of vertical and horizontal lines will be displayed better. If diagonals are essential, use diagonals with 45 degrees (or 30 or 60 degrees as a second choice).
If you use complex vector illustrations (such as engineering drawings originating from CAD programs), you may experience extremely slow display (related to numerous fragments) or undesired display-by-layer effects." Simplify such vector graphics as much as possible; if this is not possible (for example if the original was created in a 3-D program and then converted to DXF), consider converting specific illustrations to bitmaps when the primary use is on-screen display (experiment with scaling the vector graphics before conversion to bitmaps). Be aware that after conversion, print quality may be affected and text objects will not be searchable (although often the text in engineering drawings is composed of strokes and is not real text).
Text in Illustrations. If your illustrations or charts include text that users may want to search for, or if you want to make sure that the text is displayed as best as possible at various magnifications, avoid the Convert Text to Outlines function in your graphic program. This damages text display and will also prevent access to the text when using Acrobat's Find/Search functions.
Patterns & Fills. Most patterns and hatches (such as those available in FrameMaker, Word or Excel) are substituted with shades of gray, or disappear altogether, when converted to PDF.
There are variations, related to applications, printer drivers used and specific Acrobat releases. (In some cases, Type 3 bitmap fonts are used to simulate patterns -- with gray stripes at normal magnifications, reasonable display at large magnifications, and slower rendering.) Even PostScript patterns are not displayed correctly at lower magnifications, sometimes looking like a solid black or white box.
Semi-transparent fills from Microsoft Office documents are not displayed correctly (opaque if the PDF is created with Acrobat Distiller).
Gradient fills often end up in PDFs as hundreds or thousands of vector items working together to achieve the specific gradient fill effect. If applicable to your drawing or authoring application, check whether Distiller's Convert Gradients to Smooth Shades is selected (Settings> Job Options> Advanced).
Inconsistent display of line thickness. Acrobat frequently displays lines of the same weight at varying widths. This distortion only applies to display, and varies with magnification (thin lines in one magnification may appear thicker in another magnification, and vise versa). Using the thinnest lines supported by your graphics/authoring program may reduce the problem, but does not solve it. Setting the default zoom of the PDF to a multiple of 50% may also help.
Acrobat supports the PostScript setstrokeadjust setting, which was introduced to improve line thickness consistency in lower resolutions. But this has to be supported at the authoring application level as well as carried through the distilling process.
While display results with setstrokeadjust enabled are generally much better, line width consistency is still not guaranteed at all zoom levels. In addition, as a result of display bugs, some lines may gain extra length when this option is activated. Download an example here [20KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
Interface items (such as buttons, icons, etc.)
For optimized display of smaller, repeating items, consider using characters from symbol fonts or custom fonts. Display of these will generally be better than vectors or bitmaps, especially as text smoothing is turned on by default and as it is generally implemented more efficiently than smoothing of bitmaps or vector graphics (if enabled).
Note however that recent Adobe PostScript drivers for Windows 2000/XP may fail to process custom fonts (omitting these characters altogether) so check this with your specific combination of tools.
As smoothing of vector graphics is turned off by default, logos implemented as vector graphics may exhibit lower-quality display, especially when the graphics are in small scale.
For optimized display, consider having a company logo implemented through a font (integrated as a character in your authoring application) or as a bitmap.
Interactivity Aspects Relating to Graphics
Entries in the List of Figures (together with other key navigational items, such as Table of Contents, Index, List of Tables), as well as cross-references to figures, should be linked to the corresponding figures, so that items are easily accessible when reading the document on screen.
A common practice is that links point to the figure title (typically the result of a cross-reference to a paragraph holding the title). When such a link is clicked, the figure itself may not be displayed in full. For optimal performance, it is best if the link has the figure itself (graphics plus title) as a target (a non-printing Back button may be implemented as a special icon in the graphics area). Download an example here [172KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
In terms of bookmarks, which provide an on-going and easy access to all key headings and items, the List of Figures itself should be bookmarked, as a minimum.
Specific bookmarks pointing to the figures directly may be useful in publications with many titled figures, intended to be used frequently. But, to be effective, such bookmarks to figures must not be "mixed" with other bookmarks according to the location of the figures, often collapsed under lower-level headings. Instead, a separate list of figure bookmarks under a corresponding heading is much more efficient -- simulating the List of Figures in printed books. Download an example here [120KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
Mostly applicable to complex graphics, it is also possible to have bookmarks that display specific areas in a figure. Download an example here [64KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader).
Within the graphic itself, references to other document parts can be linked as needed. In the case of troubleshooting diagrams or flowcharts, for example, each box may be linked to the corresponding procedure (and marked as a link). In the case of a drawing of a machine, for example, clicking each part may take the reader to more information on that item, with tool tips or rollover text providing additional information on the link target or highlighted part. The display of specific label only when the cursor points to a specific part improves usability and helps reduce the clutter. Such a hyperlinked diagram can serve as a visual table of contents, in additional to a text-based listing.
Display: Interaction through thumbnails . Acrobat's thumbnails may be very useful with larger graphics, as they identify the viewed area within the graphics in the form of a red rectangle in the thumbnail. The red rectangle can be dragged by its border, with an immediate change of the displayed part and continuous indication on the viewed part in the larger diagram. Dragging the box at the bottom-right corner of the red rectangle in the thumbnail will adjust the zoom level.
Starting with Acrobat 5, thumbnails are generated dynamically when opening the PDF in Acrobat or in Reader (but not when the PDF is displayed through a Web browser).
Thumbnails can be embedded in the PDF for the benefit of users who view PDFs through a Web browser or use previous Acrobat/Reader versions, or for a slightly faster display. Embedding the thumbnails increases the file size, typically in the range of 6-12K per page. Acrobat Distiller can create thumbnails and embed them in the PDF being distilled, but these are of lower quality compared to the thumbnails displayed/embedded in Acrobat itself.
Thumbnails can also be useful when viewers are interested in locating a specific illustration in graphics-intensive documents. In such documents, a default opening mode showing thumbnails may be a better choice than bookmark display.
Zoom-in/sequence using Acrobat articles. Acrobat articles can be used to zoom-in on a specific figure, if that figure is defined as a single-rectangle article. Clicking the graphic area will zoom in to show as much as possible in terms of magnification. Clicking the article area again will show additional parts of the graphics if not currently displayed (depending on the maximum zoom specified and graphics size) or go back to the regular view if the article area was viewed in full. Download an example here [40KB] (Control-click or right-button click the link to download the .zip file).
Related graphics can be linked to form a single article thread (each graphics being a separate rectangle), enabling easy navigation between the different items.
Tool tips. Tool tips can be used to display brief information about graphics when there is no immediate information above/below the graphics, to display additional information (e.g. effective dates), or to provide brief information on the purpose of buttons/icons. Download an example here [344KB] (Control-click or right-button click the link to download, or open the file in your Web browser with Acrobat Reader, note that version 5 is required for this one).
Movies. Movies open up additional graphics display and interaction capabilities. QuickTime movies with multiple still images (slide shows) can show sequences of images, such as before/after or steps in a process. QuickTime virtual reality movies enable the reader to inspect an item from different view points, zoom in/out on items of interest.
Shlomo Perets is founder of Microtype, which specializes in FrameMaker and PDF training and resources.
Copyright © 2002-2003 BinaryThing Pty. Ltd. All Rights Reserved. Used with Permission.
Liked This? Read These!
Opcoders today introduced GraphicDesignerToolbox version 1.0, an unique and powerful Mac OS X graphics editor for generating textures, composing logos, photo manipulation, text effects and web... Read More
Like Thought is proud to announce Opacity Express 1.0, their easy to use editor for screen graphics, exclusively for Mac OS X 10.5 Leopard. Opacity Express is a slimmed down, more affordable... Read More
When you go to save or open a file in Photoshop, do you ever stop and wonder what exactly all of the file formats you can choose from really are? Photoshop's Open and Save dialog boxes together... Read More
Adobe Photoshop gives you more than 20 different file formats from which to choose. Using the right one can spell the difference between a file that prints perfectly and one that looks like it's... Read More